A multi-functional lubricant designed to surpass the requirements of equipment and automotive applications calling for an SAE 80W-90 viscosity grade. Formulated with wax-free synthetic base oils and high-quality additives, AMSOIL 80W-90 Synthetic Gear Lube resists thermal breakdown. Its naturally high viscosity index and shear-stable construction improve film strength and viscosity retention. Provides outstanding protection for gears and bearings, resists heat and helps extend equipment life.
Package Sizes (AGL)
|AGLQT (AGLQT-EA)||1-Quart Bottle||Each|
|AGLQT (AGLQT-CA)||1-Quart Bottle||Case of 12|
|AGL1G (AGL1G-CA)||1-Gallon||Case of 4|
|AGLTP (AGLTP-CA)||2.5-Gallon||Case of 2|
|AGL05 (AGL05-EA)||5-Gallon Pail||Each|
|AGL16 (AGL16-EA)||16-Gallon Keg||Each|
|AGL30 (AGL30-EA)||30-Gallon Drum||Each|
|AGL55 (AGL55-EA)||55-Gallon Drum||Each|
|AGL27 (AGL27-EA)||275-Gallon Tote||Each|
|Buy Now/Pricing Information ❯|
AMSOIL 80W-90 Synthetic Gear Lube is recommended for use under various combinations of high-speed, shock loads, low-speed and high-torque conditions. It is recommended for use in light- and heavy-duty, automotive, commercial or industrial applications requiring SAE 80W-90 EP gear lube.
AMSOIL 80W-90 Synthetic Gear Lube replaces conventional 80W-90 gear oils and is formulated to exceed the lubrication and performance requirements of front and rear differentials, transfer cases, transaxles, manual transmissions, oil-lubricated wheel bearings and steering gear boxes that require any of the following specifications:
API GL-5 & MT-1, MIL-PRF-2105E, Dana* SHAES* 234 (formerly Eaton* PS-037) for 250,000 miles, Mack* GO-J, Arvin/Meritor* O-76D plus hypoid gear oil specifications from foreign or domestic manufacturers such as GM*, Ford* and Daimler Chrysler*.
Can also be used in rear axles where API Service GL-4 lubricant is recommended.
Amsoil Synthetic Gear Lube provides:
For product service life in differentials, consult your owner's manual or the Original Equipment Manufacturer (OEM) to establish the application, NORMAL or SEVERE.
For product service life in non-differential applications, consult owner’s manual or the OEM for either normal or severe synthetic oil service intervals. Where service intervals are unavailable, drain at twice the interval for conventional oil.
Note: Amsoil does not support extended drain intervals where water contamination occurs. Check and service the gear oil frequently when water contamination is possible.
Gear oils should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions unless the gear system is properly sealed and equipped with membrane-type breathers.
AMSOIL 80W-90 Synthetic Gear Lube is compatible with conventional and synthetic gear oil. Mixing AMSOIL Synthetic Gear Lube with other oil, however, will shorten the oil’s life expectancy and reduce the performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed.
AMSOIL 80W-90 Synthetic Gear Lube is compatible with most limited-slip differentials. If limited-slip differential chatter occurs, add AMSOIL Slip Lock® friction modifier additive.
For product service life in non-differential applications, consult owner's manual or the OEM for either normal or severe synthetic oil service intervals. Where service intervals are unavailable, drain at twice the interval for conventional oil.
Note: AMSOIL does not support extended drain intervals where water contamination occurs. Check and service the gear oil frequently when water contamination is possible. Gear oil should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions unless the gear system is properly sealed and equipped with membrane-type breathers.
Amsoil products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
|TYPICAL TECHNICAL PROPERTIES|
Amsoil Synthetic Gear Lube 80W-90 (AGL)
|Kinematic Viscosity @ 100˚C, cSt (ASTM D445)||15.5|
|Kinematic Viscosity @ 40˚C, cSt (ASTM D445)||120.2|
|Viscosity Index (ASTM D2270)||135|
|Pour Point ˚C (˚F) (ASTM D97)||-42 (-44)|
|Flash Point ˚C (˚F) (ASTM D92)||208 (406)|
|Brookfield Viscosity @ -40˚C, cP (ASTM D2983)||46,200|
|Foam Stability (ASTM D892)||0/0, 00/0, 0/0|
|Falex Procedure B (ASTM D3233) (failure load, lbf.)||2000|
|Buy Now/Pricing Information ❯|
*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by Amsoil for use in the applications shown.