Engineered for extended drain intervals up to 500,000 miles as set by equipment manufacturers for over-the-road trucks and heavy equipment. Provides long life in passenger cars and trucks. Excellent all season summer and winter performance. Outperforms all conventional gear oils.
AMSOIL Long Life Synthetic Gear Lube is an extended-drain gear lube engineered to last several times longer and protect gears better than conventional gear oils. This exclusive AMSOIL formulation of premium synthetic base oils and high-performance additives resists acid, carbon and varnish formation from oxidative breakdown. Components run cleaner and last longer. AMSOIL Long Life Synthetic Gear Lube is shear-stable and reduces friction. It maintains its viscosity during extended service for maximum wear control and is fuel-efficient. The superior cold-temperature fluidity and high-temperature stability properties of AMSOIL Long Life Synthetic Gear Lube make it excellent for all-season use. AMSOIL Long Life Synthetic Gear Lube helps extend equipment life and reduce maintenance costs.
Package Sizes (FGR)
|FGRQT (FGRQT-EA)||1-Quart Bottle||Each|
|FGRQT (FGRQT-CA)||1-Quart Bottle||Case of 12|
|FGR1G (FGR1G-CA)||1-Gallon||Case of 4|
|FGR05 (FGR05-EA)||5-Gallon Pail||Each|
|FGR16 (FGR16-EA)||16-Gallon Keg||Each|
|FGR30 (FGR30-EA)||30-Gallon Drum||Each|
|FGR55 (FGR55-EA)||55-Gallon Drum||Each|
|FGR27 (FGR27-EA)||275-Gallon Tote||Each|
|Buy Now/Pricing Information ❯|
AMSOIL Long Life Synthetic Gear Lube, in the correct viscosity grade, is recommended for domestic and foreign applications, including over-the-road trucks, light-, medium- and heavy-duty trucks, off-road equipment, commercial vehicles, motor homes, autos, SUVs, emergency vehicles, buses, delivery/utility vehicles and tractors.
Use AMSOIL Long Life Synthetic Gear Lube in differentials, manual transmissions or other gear applications where one or more of the following standards are specified: API GL-5 & MT-1, MIL-PRF-2105E, Dana* SHAES* 234 (Formerly Eaton* PS-037) for 250,000 miles, Dana SHAES 256 (Formerly Eaton PS-163) for 500,000 miles, Dana SHAES 429A, Mack* GO-J & GO-J+, Meritor* 0-76N (75W-90) & 0-80 (80W-140) plus hypoid gear oil specifications from ZF TE-ML 07A and 08 foreign and domestic manufacturers such as GM*, Ford* and Daimler* Chrysler*. It can also be used in rear axles where API Service GL-4 lubricant is recommended.
AMSOIL Long Life Synthetic Gear Lube provides:
For product service life in differentials, consult your owner's manual or the Original Equipment Manufacturer (OEM) to establish the application, NORMAL or SEVERE.
For product service life in non-differential applications, consult owner’s manual or the OEM for either normal or severe synthetic oil service intervals. Where service intervals are unavailable, drain at twice the interval for conventional oil.
Note: AMSOIL does not support extended drain intervals where water contamination occurs. Check and service the gear oil frequently when water contamination is possible.
Gear oils should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions unless the gear system is properly sealed and equipped with membrane-type breathers.
AMSOIL Long Life Synthetic Gear Lube is compatible with conventional gear oil. Mixing AMSOIL gear oils with other oil, however, reduces the oil’s benefits and nullifies the extended service life recommendations.
AMSOIL Long Life Synthetic Gear Lube is compatible with most limited-slip differentials. If limited-slip differential chatter occurs, add AMSOIL Slip-Lock® friction modifier additive.
AMSOIL Long Life Synthetic Gear Lube 75W-90 replaces competitors' 75W-90 and 80W-90 viscosity grades. AMSOIL Long Life Synthetic Gear Lube 80W-140 replaces competitors' 80W-140 and 85W-140 viscosity grades.
Amsoil products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
|TYPICAL TECHNICAL PROPERTIES
Amsoil Long Life Synthetic Gear Lube 75W-90 (FGR)
|Kinematic Viscosity @ 100˚C, cSt (ASTM D445)||16.6|
|Kinematic Viscosity @ 40˚C, cSt (ASTM D445)||129.7|
|Viscosity Index (ASTM D2270)||137|
|Pour Point ˚C (˚F) (ASTM D97)||-51 (-60)|
|Flash Point ˚C (˚F) (ASTM D92)||214 (417)|
|Brookfield Viscosity @ -40˚C, cP (ASTM D2983)||98,300|
|Foam Stability (ASTM D892)||0/0, 00/0, 0/0|
|Buy Now/Pricing Information ❯|
*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by Amsoil for use in the applications shown.